No matter what the brand, all washing machines do have the spin, the tub, the agitator, and also the timer that controls and coordinates the start, stop and duration of the washing cycles. They must have a mechanism that controls the spinning basket at the end of the spin cycle and a lid lock to prevent the lid from being opened during or shortly after the spin cycle.

As well, no matter what is its brand, all washing machines have the risk to experience a breakdown. These following points are major issues that might occur to your washer.
– Leaking
The leaking can be caused by a damaged hose. If it’s not from the hose, you can take a look at the water pump too. Some washer pumps have a hole that allows water to weep out when the seal starts to go bad. The solution is to replace or rebuild the pump.

– Troubled agitator
The common problem of a troubled agitator (either it is working weakly or not all) is the lines that connect it to the driveshaft may be stripped. And you may check if the shaft keeps rotating but the agitator is not. In this case, replace it immediately.

– Shaking
When the dampening straps become damaged or stretched, your washing machine would probably shake or move uncontrollably. If it’s not from the dampening straps, you may check that the washer’s feet position are properly balanced in the same level so that it does not move during use.
If you have a problem where you need washing machine repairs Highbury, there are handy repairmen available to help you fix it. Just please help yourself and make a call – they know what they have to do. Having the professionals will cost much less than buying a new washing machine.